Moisture content (oven drying) calculator

Inputs in the worked example

The live calculator starts with these values; change any of them and every result, check and diagram updates instantly.

Worked example — results

• ✓ Range within tolerance
• ✓ Dry mass ≥ 30 g per specimen (fine soil guide)

Method, formulas and assumptions

• Mean moisture content w = AVERAGE([t.w]) = 21.483 %
• Range (max − min) = MAX([t.w])-MIN([t.w]) = 0.10162 %
• Number of specimens = COUNT([t.w]) = 3

Related site investigation calculators

• Specific gravity (pycnometer) — Two-trial lab sheet for soil particle density with temperature correction to 20 °C and repeatability check.
• Particle size distribution — Sieve masses to % passing, grading curve, D10/D30/D60, Cu, Cc and a USCS group symbol.
• Hydrometer analysis — Fine-fraction grading from hydrometer readings: particle diameter by Stokes' law and percent finer.
• Atterberg limits & plasticity chart — Liquid limit from cone penetrometer or Casagrande points, PI, liquidity index and position on the plasticity…
• Moisture, density & phase relations — Bulk and dry density, void ratio, porosity, saturation and field density ratio, with a three-phase diagram.
• Fines content by washing — Percentage finer than 75 µm from the dry mass before and after washing plus dry sieving of the residue.
• Liquid limit: cone penetrometer — Linear fit of moisture content against cone penetration; the liquid limit is w at 20 mm penetration.
• Liquid limit: Casagrande cup — Flow curve (w against log N) by least squares; LL at 25 blows and the flow index.
• Liquid limit: one-point method — LL from a single Casagrande reading using LL = wN (N/25)^0.121, valid for 20–30 blows.
• Plastic limit & consistency indices — PL from repeat threads, PI, liquidity and consistency index, activity and plasticity chart class (A-line).